Digital View DVR-810 Manuál s instrukcemi Strana 147

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 150
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 146
Appendix B: Alarm Board Configuration
Alarm I/O pin assignment
The alarm connector, Figure 1, is used to provide one sensor alarm input for each camera input.
For easy operation, an alarm extension board, Figure 2, is provided to connect to the alarm
connector.
Each alarm input requires two wires, one wire connects to the desired alarm input pin, the second
wire connects to the ground. The alarm signal assignment is shown as below.
Appendix
B
<Figure 2>
PR16D00400 Alarm extension
board (HOST)
<Figure 1>
D-SUB 25 pin female connector
(DVR)
Zobrazit stránku 146
1 2 ... 142 143 144 145 146 147 148 149 150

Komentáře k této Příručce

Žádné komentáře